ReferenceDesignLibrary

Refine Search

Eval Board Current Out Voltage In Features On Resistance (Typ) @ Vin Standby Current [Maximum] Standby Current [Typical] Design Author Component Count + Extras Quiescent Current [Maximum] Power Dissipation (Max) Quiescent Current [Typical] Main I.C. Base Part
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (7)

7 Results - Page 1/1

TPS2066CDGNEVM-015: 1A, 4.5 ~ 5.5 Vin, Power Dist Switch

Manufacturer: Texas Instruments

The TPS20xxCDRCEVM-016 and TPS20xxCDGNEVM-015 are evaluation modules (EVM) for the Texas Instruments family of dual-channel, current-limited, power distribution switches.

View Design

TPS2543EVM-064: USB 4.5 - 5.5 Vin, 2.5 A Switch

Manufacturer: Texas Instruments

The Texas Instruments TPS2543EVM-064 evaluation module (EVM) helps designers evaluate the performance of the TPS2543 USB Charging Port Power Switch and Controller. The EVM contains input and output connectors. Jumper controls are also provided to ease evaluation of device features.

View Design

NCP380HSNAJAGEVB: 100mA ~ 2.1A, 2.5 ~ 5.5 Vin, High Side Switch

Manufacturer: ON Semiconductor

The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered

View Design

MIC94300YMT EV: 1.8 ~ 3.6 Vin, 200mA Load Switch

Manufacturer: Microchip Technology

The MIC94300 is an integrated load switch that incorporates Micrel’s Ripple Blocker™ active filter technology. The MIC94300 provides high frequency ripple attenuation for applications where switching noise cannot be tolerated by sensitive downstream circuits such as RF Applications. The MIC94300 replaces a high-side switch, large filtering inductor, and capacitors to save board area.

View Design

DC2313A: 6 Ch. Seq. Controller, 6 ~ 14V in

Manufacturer: Linear Technology/Analog Devices

Demonstration circuit 2313A showcases the LTC2937, a programmable six channel power supply sequencer and voltage supervisor.

View Design

NCP380LSNAJAGEVB: 2.1A, 2.5 ~ 5.5V, High Side Switch

Manufacturer: ON Semiconductor

The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered

View Design

NCP380LMUAJAGEVB: 2.1A, 2.5 ~ 5.5V in, High-side

Manufacturer: ON Semiconductor

The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered

View Design
7 Results - Page 1/1