LMG1210EVM-012: 10A, 0 ~ 100V Half Bridge Driver

Summary

The LMG1210EVM-012 is a small, easy-to-use power stage with an external PWM signal (or HI and LI). The board can be configured as a buck converter, boost converter or other converter topology using a half bridge. Because this is an open-loop board with an external PWM signal, do not use it to evaluate transient response. It can be used to evaluate the performance of the LMG1210 as a driver for the GaN FET halfbridge converter to sample measurements such as efficiency, switching speed, dv/dt, and adjustable dead time. The EVM features a LMG1210 half-bridge driver coupled with two 100 V, 7 mΩ GaN FETs in a half bridge configuration

Specifications

Manufacturer Texas Instruments
Category Power Management
Sub-Category Power Output Stages (H-Bridge, Half Bridge)
Eval Board Part Number 296-LMG1210EVM-012-ND
Eval Board Supplier Texas Instruments
Eval Board Board not Stocked
Configuration 1 Half H-Bridge
Voltage Out Range 0 ~ 100 V
Current Out 10 A
Interface PWM, Single
Features Under Voltage Protection (UVP)
Switching Frequency (Max) 15 MHz
Component Count + Extras 35 + 31
Design Author Texas Instruments
Main I.C. Base Part LMG1210
Date Created By Author 2018-01
Date Added To Library 2019-08

Eval Board

Order a fully assembled board:

Quantity Available: 0

Quantity:

Support Documents & Media

LMG1210EVM-012 - User Guide LMG1210 - Datasheet LMG1210EVM-012 - Design Files

Media

LMG1210EVM-012 - Schematic LMG1210EVM-012 - Board 1 LMG1210EVM-012 - Board 2 LMG1210EVM-012 - Chart 1 LMG1210EVM-012 - Connection 1 LMG1210EVM-012 - Connection 2