SOM-5890 Manual Datasheet by Advantech Corp

View All Related Products | Download PDF Datasheet
AD\-\NTECH Enabling m Inldligml Plane!
User Manual
SOM-5890
SOM-5890 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2011
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Part No. 2006589010 Edition 1
Printed in Taiwan July 2011
iii SOM-5890 User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Please contact your local supplier for
ordering information.
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-
sure products.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
V
SOM-5890 User Manual iv
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
Product name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software,
etc.)
A complete description of the problem
The exact wording of any error messages
Warnings, Cautions and Notes
Document Feedback
To assist us in making improvements to this manual, we would welcome comments
and constructive criticism. Please send all such - in writing to: support@advan-
tech.com
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
1 x SOM-5890 Module
1 x Heatspreader 125*95*11mm
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Note! Notes provide optional additional information.
v SOM-5890 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
SOM-5890 User Manual vi
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.
vii SOM-5890 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Specifications ............................................................................................ 2
1.2.1 Standard System On Module functions ........................................ 2
1.2.2 Display Interface ........................................................................... 3
1.2.3 Audio function ............................................................................... 3
1.2.4 Ethernet ........................................................................................ 3
1.2.5 iManager ....................................................................................... 3
1.2.6 Mechanical and environmental ..................................................... 3
Chapter 2 Mechanical Information ......................5
2.1 Connectors................................................................................................ 6
2.1.1 Board Connector........................................................................... 6
2.1.2 Connector List............................................................................... 6
2.2 Mechanical ................................................................................................ 7
2.2.1 Jumper and Connector Location................................................... 7
Figure 2.1 Board Layout (component side) ................................. 7
Figure 2.2 Board Layout (Solder side)......................................... 7
2.2.2 Board Dimension .......................................................................... 8
Figure 2.3 Board Dimension (Component side) .......................... 8
Figure 2.4 Board Dimension (Solder side)................................... 8
Chapter 3 BIOS Setup...........................................9
3.1 BIOS Setup ............................................................................................. 10
Figure 3.1 Setup program initial screen..................................... 10
3.2 Entering Setup ........................................................................................ 10
3.3 Main Setup .............................................................................................. 11
Figure 3.2 Main setup screen .................................................... 11
3.3.1 System time / System date ......................................................... 11
3.4 Advanced BIOS Features Setup ............................................................. 12
Figure 3.3 Advanced BIOS features setup screen .................... 12
3.4.1 ACPI Settings.............................................................................. 13
Figure 3.4 ACPI Setting ............................................................. 13
3.4.2 TPM Configuration ...................................................................... 14
Figure 3.5 TPM Configuration.................................................... 14
3.4.3 CPU Configuration ...................................................................... 14
Figure 3.6 CPU Configuration.................................................... 14
3.4.4 SATA Configuration .................................................................... 15
Figure 3.7 SATA Configuration.................................................. 15
3.4.5 Intel TXT(LT) Configuration ........................................................ 16
Figure 3.8 Intel TXT(LT) Configuration ...................................... 16
3.4.6 PCH-FW Configuration ............................................................... 17
Figure 3.9 PCH-FW Configuration............................................. 17
3.4.7 AMT Configuration ...................................................................... 17
Figure 3.10AMT Configuration.................................................... 17
3.4.8 USB Configuration ...................................................................... 19
Figure 3.11USB Configuration.................................................... 19
3.4.9 Embedded Controller Configuration............................................ 20
Figure 3.12Embedded Controller Configuration ......................... 20
3.4.10 Super IO Configuration ............................................................... 21
Figure 3.13Super IO Configuration............................................. 21
SOM-5890 User Manual viii
3.4.11 Serial Port Console Redirection.................................................. 22
Figure 3.14Serial Port Console Redirection ............................... 22
3.4.12 Switchable Graphics ................................................................... 23
Figure 3.15Switchable Graphics................................................. 23
3.4.13 Sandybridge DTS Configuration ................................................. 23
Figure 3.16Sandybridge DTS Configuration............................... 23
3.4.14 Sandybridge PPM Configuration ................................................ 24
Figure 3.17Sandybridge PPM Configuration .............................. 24
3.5 Chipset.................................................................................................... 25
Figure 3.18Chipset Setup........................................................... 25
3.5.1 System Agent (SA) Configuration............................................... 25
Figure 3.19System Agent (SA) Configuration ............................ 25
Figure 3.20Intel IGFX Configuration........................................... 26
Figure 3.21LCD Control.............................................................. 27
Figure 3.22NB PCIe Configuration ............................................. 28
3.5.2 PCH-IO Configuration................................................................. 29
Figure 3.23PCH-IO Configuration .............................................. 29
Figure 3.24USB Configuration.................................................... 30
Figure 3.25PCI Express Configuration ....................................... 30
3.6 Boot Settings........................................................................................... 31
Figure 3.26Boot Setup Utility...................................................... 31
3.7 Security Setup......................................................................................... 32
Figure 3.27Password Configuration ........................................... 32
3.8 Save & Exit ............................................................................................. 33
Figure 3.28Save & Exit............................................................... 33
3.8.1 Save Changes and Exit .............................................................. 33
3.8.2 Discard Changes and Exit .......................................................... 33
3.8.3 Save Changes and Reset........................................................... 33
3.8.4 Discard Changes and Reset....................................................... 33
3.8.5 Save Changes ............................................................................ 33
3.8.6 Discard Changes ........................................................................ 33
3.8.7 Restore Defaults ......................................................................... 34
3.8.8 Save User Defaults..................................................................... 34
3.8.9 Restore User Defaults ................................................................ 34
Chapter 4 S/W Introduction & Installation........ 35
4.1 S/W Introduction ..................................................................................... 36
4.2 Driver Installation .................................................................................... 36
4.2.1 Windows XP professional ........................................................... 36
4.2.2 Other OS..................................................................................... 36
Appendix A Watchdog Timer................................ 37
A.1 Programming the Watchdog Timer ......................................................... 38
Appendix B Programming GPIO........................... 39
B.1 GPIO Register......................................................................................... 40
Appendix C System Assignments........................ 41
C.1 System I/O Ports..................................................................................... 42
Table C.1: System I/O ports....................................................... 42
C.2 DMA Channel Assignments .................................................................... 43
Table C.2: DMA channel assignments....................................... 43
C.3 Interrupt Assignments ............................................................................. 43
ix SOM-5890 User Manual
Table C.3: Interrupt assignments ............................................... 43
C.4 1st MB Memory Map ............................................................................... 44
Table C.4: 1st MB memory map ................................................ 44
SOM-5890 User Manual x
Chapter 1
1General Information
This chapter gives background
information on the SOM-5890 CPU
System on Module.
Sections include:
Introduction
Specification
SOM-5890 User Manual 2
1.1 Introduction
SOM-5890 is a COM-Express basic module with Type 6 pin-out that fully complies
with the PCI Industrial Computer Manufacturers PICMG COM Express standard. The
new CPU module integrates Intel 2nd Generation Core i7, i5, i3, and Celeron proces-
sors (code name Sandy Bridge) which support Intel 6th generation graphics core with
AVC/VC1/MPEG2 HW decode. It also integrates QM67 (codename Cougar Point)
chipset which provides state-of-the-art interface such as PCI Express Gen 2 and
SATA Gen3. In a basic form factor of 125mm x 95mm, the SOM-5890 provides a
scalable high performance and easy to integrate solution for customers’ applications
by utilizing a plug-in CPU module on an application-specific customer solution board.
The SOM-5890 with advanced I/O capacity incorporates serial differential signaling
technologies such as PCI Express, Serial ATA, USB 2.0, LVDS and HDMI/DVI/Dis-
playport interfaces. SOM-5890 offers design partners more choices for their own
applications needing higher computing speeds while maintaining a basic form factor.
SOM-5890 complies with the "Green Function" standard and supports Doze,
Standby and Suspend modes. The small size (125 mm x 95 mm) and use of two high
capacity connectors based on the proven COM-Basic form factor, allows the COM-
basic modules to be easily and securely mounted onto a customized solution board
or our standard SOM-DB5700 development board.
The SOM-5890 is a highly integrated multimedia COM module that combines audio,
video, and network functions. It provides excellent processing capability via Intel 2nd
Gen Core i processor, dual channel LVDS, HDMI, DVI,and Displayport for multi-dis-
play, DDR3 non-ECC or ECC memory (A or B version respectively) up to 16 GB, and
high definition audio interfaces.
1.2 Specifications
1.2.1 Standard System On Module functions
Processor: Intel® Core™ i7/i5/i3 and Celeron processors
(For detailed CPU support information please contact your sales representative)
BIOS: AMI EFI 8MB Flash
Chipset: Intel® QM67 Chipset
Intel Smart Cache:
Intel® Core i7: 6 MB (Quad Core) or 4 MB (Duo Core) Smart Cache
Intel® Core i5/i3: 3 MB Smart Cache
Intel® Celeron: 2 MB Smart Cache
System memory: 2 204-pin SODIMM support non-ECC (A version) or ECC (B
version) DDR3-1066/1333 up to 16GB
Power management: Supports enhanced Intel SpeedStep technology, S0, S3,
S4, S5, C0, C1, C1E, C3, C6, C7, and ACPI/APM.
SATA interface: 2 SATAIII channel up to 600MB/s and 2 SATAII channel up to
300MB/s
Watchdog timer: 65536 levels timer interval, from 0 to 65535 sec multi-level
and multi-option WatchDog Timer
USB interface: Supports 8 USB 2.0 ports
Expansion Interface: Supports PEG x16, 7 PCIe x1 (PCIe x4 option), LPC,
SMBus, I2C
3 SOM-5890 User Manual
Chapter 1 General Information
1.2.2 Display Interface
Chipset: Intel Core i processor integrated 6th generation graphics core with 12
execution units. Support DX10.1, Open GL 3.0, full AVC/VC1/MPEG2 HW
Decode
Display type: VGA, LVDS, HDMI, DVI, Displayport
Display mode:
VGA port: 2048x1536
LVDS: Dual Channel 18/24-bit
HDMI/DVI: 1920x1200
Displayport: 2560x1600
GMA driver supports up to 2 independent displays
Four independent display supported with hybrid multi-monitor capability (inte-
grated and discrete graphics working simultaneously).
1.2.3 Audio function
Audio interface: Intel high definition audio interface
1.2.4 Ethernet
Chipset: Intel 82579LM Gigabit Ethernet. Base on IEEE 10BASE-T, 100BASE-
TX and 1000BASE-T standard.
1.2.5 iManager
Board information
Multi-level stage WDT (IRQ, SCI, HW restart, and power off)
Hardware monitor for +12 V, +5 VSB, CMOS Battery, CPU temperature
Smart fan (full speed, manual speed, auto speed)
SMBus/I2C Bus
Deep Sleep Mode in S4/S5
1.2.6 Mechanical and environmental
Dimensions: COM-Basic form-factor, 125 mm x 95 mm (4.92" x 3.74")
Power supply voltage: +12 V power only (+5 VSB is need for ACPI and ATX
power)
Power requirement: SOM-5890FG-U1B1E w/ DDR3-1333 2GB ECC Memory
3.57A @ +12V
Operating temperature: 0 ~ 60° C (32 ~ 140° F)
Operating humidity: 0% ~ 90% relative humidity, non-condensing
Weight: 0.103 Kg (weight of total package)
SOM-5890 User Manual 4
Chapter 2
2Mechanical
Information
This chapter gives mechanical
and connector information on the
SOM-5890 CPU System on Mod-
ule.
Sections include:
Connector Information
Mechanical Drawing
XI 22mm 0 CRT O LVDS O ACWIHDA 0 2mm 0 “YA 0 U85 0 maumzc 0 6H0 0 WDT . POI-En 0 LPCISPI x2:mpllll 0 "WI 0 DllpllyPofl 0 80W 0 PCl-EXI 0 PEGKIG FAN _3H_2.0mm
SOM-5890 User Manual 6
2.1 Connectors
2.1.1 Board Connector
There are two connectors at the rear side of SOM-5890 for connecting to carrier
boards.
Pin Assignments for X1/X2 connector
Please refer to Advantech_COM_Express_Design Guide, Chapter 2.
You can download Advantech_COM_Express_Design Guide from http://com.advan-
tech.com/
2.1.2 Connector List
FAN1 Fan
Description Wafter 2.0 mm 3P 90D (M) DIP 2001-WR-03-LF W/Lock
Pin Pin Name
1 Fan Tacho-Input
2Fan Out
3GND
W9? @© @© ©© @© ©© ©© © @WZflgg
7 SOM-5890 User Manual
Chapter 2 Mechanical Information
2.2 Mechanical
2.2.1 Jumper and Connector Location
Figure 2.1 Board Layout (component side)
Figure 2.2 Board Layout (Solder side)
FAN1
R2 (2327 mt E Eq’ on Q3 (’3 V\V\ H (D6 9 91 a 83‘ a 3 18 gmp========m 115 a {gm 0 l i D?
SOM-5890 User Manual 8
2.2.2 Board Dimension
Figure 2.3 Board Dimension (Component side)
Figure 2.4 Board Dimension (Solder side)
Chapter 3
3BIOS Setup
SOM-5890 User Manual 10
3.1 BIOS Setup
AMIBIOS has been integrated into many motherboards for over a decade. With the
AMIBIOS Setup program, users can modify BIOS settings and control various sys-
tem features. This chapter describes the basic navigation of the SOM-5890 BIOS
setup screens.
Figure 3.1 Setup program initial screen
AMI's BIOS ROM has a built-in Setup program that allows users to modify the basic
system configuration. This information is stored in flash ROM so it retains the Setup
information when the power is turned off.
3.2 Entering Setup
Turn on the computer and then press <F2> or <DEL> to enter Setup menu.
11 SOM-5890 User Manual
Chapter 3 BIOS Setup
3.3 Main Setup
When users first enter the BIOS Setup Utility, users will enter the Main setup screen.
Users can always return to the Main setup screen by selecting the Main tab. There
are two Main Setup options. They are described in this section. The Main BIOS
Setup screen is shown below.
Figure 3.2 Main setup screen
The Main BIOS setup screen has two main frames. The left frame displays all the
options that can be configured. Grayed-out options cannot be configured; options in
blue can. The right frame displays the key legend.
Above the key legend is an area reserved for a text message. When an option is
selected in the left frame, it is highlighted in white. Often a text message will accom-
pany it.
3.3.1 System time / System date
Use this option to change the system time and date. Highlight System Time or Sys-
tem Date using the <Arrow> keys. Enter new values through the keyboard. Press the
<Tab> key or the <Arrow> keys to move between fields. The date must be entered in
MM/DD/YY format. The time must be entered in HH:MM:SS format.
wrin Y’Jj mum 7 mamam L m P-E [my vnmmedl
SOM-5890 User Manual 12
3.4 Advanced BIOS Features Setup
Select the Advanced tab from the SOM-5890 setup screen to enter the Advanced
BIOS Setup screen. Users can select any item in the left frame of the screen, such as
CPU Configuration, to go to the sub menu for that item. Users can display an
Advanced BIOS Setup option by highlighting it using the <Arrow> keys. All Advanced
BIOS Setup options are described in this section. The Advanced BIOS Setup
screens are shown below. The sub menus are described on the following pages.
Figure 3.3 Advanced BIOS features setup screen
Launch PXE OpROM
This item allows users to enable or disable launch PXE OpROM if available.
Launch Storage OpROM
This item allows users to enable or disable launch storage OpROM if available.
w my; mngmgm in mu m» vV'mngthvi, .mnmcd]
13 SOM-5890 User Manual
Chapter 3 BIOS Setup
3.4.1 ACPI Settings
Figure 3.4 ACPI Setting
Enable ACPI Auto Configuration
This item allows users to enable or disable BIOS ACPI auto configuration.
Enable Hibernation
This item allows users to enable or disable hibernation.
ACPI Sleep State
This item allows users to set the ACPI sleep state.
Lock Legacy Resources
This item allows users to lock legacy devices’ resources.
m. supvum museum H‘Anerrthr‘aadinz [Enabled]
SOM-5890 User Manual 14
3.4.2 TPM Configuration
Figure 3.5 TPM Configuration
TPM Support
Disable/Enable TPM if available.
3.4.3 CPU Configuration
Figure 3.6 CPU Configuration
um um I ‘ [Emu 1e
15 SOM-5890 User Manual
Chapter 3 BIOS Setup
Hyper Threading Technology
This item allows users to enable or disable Intel® Hyper Threading technology.
Active Processor Cores
This item allows users to set how many processor cores should be active.
Limit CPUID Maximum
This item allows users to limit the maximum value of CPUID.
Execute Disable Bit
This item allows users to enable or disable the No-Execution page protection
technology.
Hardware Prefetcher
This item allows users to enable or disable the hardware prefetcher feature.
Adjacent Cache Line Prefetch
This item allows users to enable or disable the adjacent cache line prefetch fea-
ture.
Intel Virtualization Technology
This item allows users to enable or disable the intel virtualization technology.
3.4.4 SATA Configuration
Figure 3.7 SATA Configuration
SATA Controller(s)
This item allows users to enable or disable the SATA controller(s).
SATA Mode Selection
This item allows users to select mode of SATA controller(s).
SOM-5890 User Manual 16
3.4.5 Intel TXT(LT) Configuration
Figure 3.8 Intel TXT(LT) Configuration
Secure Mode Extensions (SMX)
This item allows users to enable or disable SMX.
Intel TXT(LT) Support
This item allows users to enable or disable Intel TXT.
b firmware Update numgumuun me) am [Enemzd]
17 SOM-5890 User Manual
Chapter 3 BIOS Setup
3.4.6 PCH-FW Configuration
Figure 3.9 PCH-FW Configuration
Me FW Image Re-Flash
This item allows users to enable or disable Me FW image re-flash function.
3.4.7 AMT Configuration
Figure 3.10 AMT Configuration
SOM-5890 User Manual 18
Intel AMT
This item allows users to enable or disable Intel AMT BIOS extension.
Intel AMT Setup Prompt
This item allows users to enable or disable Intel AMT setup prompt.
BIOS Hotkey Pressed
This item allows users to enable or disable BIOS hotkey press.
MEBx Selection Screen
This item allows users to enable or disable MEBx selection screen.
Verbose MEBx Output
This item allows users to enable or disable MEBx verbose output.
Hide Un-Configuration ME Confirmation
This item allows users to hide un-configure ME without password confirmation
prompt.
MEBx Debug Message Output
This item allows users to enable or disable MEBx debug message.
Un-Configure ME
This item allows users to un-configure ME without password.
Intel AMT Password Write Enable
This item allows users to enable or disable Intel AMT password write.
Amt Wait Timer
Set timer to wait before sending ASF_GET_BOOT_OPTIONS.
ASF
This item allows users to enable or disable Alert Specification Format.
Activate Remote Assistance Process
This item allows users to enable or disable trigger CIRA boot.
USB Configure
This item allows users to enable or disable USB configure function.
PET Progress
This item allows users to enable or disable PET events progress to receive PET
events or not.
Intel AMT SPI Protected
This item allows users to enable or disable Intel AMT SPI write protect.
AMT CIRA Timeout
OEM defined timeout for MPS connection to be established.
WatchDog
This item allows users to enable or disable WatchDog Timer.
OS Timer
Sets OS watchdog timer.
BIOS Timer
Sets BIOS watchdog timer.
n w; mm
19 SOM-5890 User Manual
Chapter 3 BIOS Setup
3.4.8 USB Configuration
Figure 3.11 USB Configuration
Legacy USB Support
Enable the support for legacy USB. Auto option disables legacy support if no
USB devices are connected.
EHCI Hand-Off
This is a workaround for the OS without EHCI hand-off support. The EHCI own-
ership change should claim by EHCI driver.
USB transfer time-out
Set the time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out
Set USB mass storage device Start Unit command time-out value.
Device power-up delay
Sets the maximum time the device will take before it properly reports itself to the
Host Controller. 'Auto' uses a default value: for a Root port it is 100 ms, for a
Hub port the delay is taken from the Hub descriptor.
as manager Hatchoog mu [1mm
SOM-5890 User Manual 20
3.4.9 Embedded Controller Configuration
Figure 3.12 Embedded Controller Configuration
EC iManager WatchDog IRQ
This item allows users to set the irq number of EC watchdog.
EC Power Saving Mode
This item allows users to set board’s power saving mode when off.
CPU Shutdown Temperature
This item allows users to set the value of CPU shutdown temperature.
EC iManager Smart FAN
This item allows users to enable or disable smart FAN feature.
EC Serial Port A
This item allows users to enable or disable EC serial port A.
EC Serial Port B
This item allows users to enable or disable EC serial port B.
Backlight Enable Polarity
This item allows users to set backlight enable polarity.
yum \ rm ‘ F'Hrmm‘Tlm
21 SOM-5890 User Manual
Chapter 3 BIOS Setup
3.4.10 Super IO Configuration
Figure 3.13 Super IO Configuration
Serial Port 0 Configuration
This item allows users to configure serial port 0.
Serial Port 1 Configuration
This item allows users to configure serial port 1.
Parallel Port Configuration
This item allows users to configure parallel port.
cansnLE Reulr'eclinn [Enah 12d!
SOM-5890 User Manual 22
3.4.11 Serial Port Console Redirection
Figure 3.14 Serial Port Console Redirection
Console Redirection
This item allows users to enable or disable console redirection for Microsoft
Windows Emergency Management Services (EMS).
Out-of-Band Mgmt Port
Select the port for Microsoft Windows Emergency Management Services (EMS)
to allow for remote management of a Windows Server OS.
Terminal Type
VT-UTF8 is the preferred terminal type for out-of-band management. The next
best choice is VT100+ and then VT100. See above, in Console Redirection Set-
tings page, for more Help with Terminal Type/Emulation.
cpu ms lmsamem
23 SOM-5890 User Manual
Chapter 3 BIOS Setup
3.4.12 Switchable Graphics
Figure 3.15 Switchable Graphics
SG Mode Select
This item allows users to select switchable graphics mode.
3.4.13 Sandybridge DTS Configuration
Figure 3.16 Sandybridge DTS Configuration
nu Ir Hm , m u rmuw
SOM-5890 User Manual 24
CPU DTS
This item allows users to enable or disable CPU DTS.
3.4.14 Sandybridge PPM Configuration
Figure 3.17 Sandybridge PPM Configuration
EIST
CPU runs at its default speed if disabled; CPU speed is controlled by the operat-
ing system if enabled.
Turbo Mode
This item allows users to enable or disable turbo mode.
CPU C3/C6/C7 Report
This item allows users to enable or disable CPU C-state support.
r 595mm Agem ‘sm Configuration [Enah Led]
25 SOM-5890 User Manual
Chapter 3 BIOS Setup
3.5 Chipset
Select the Chipset tab from the SOM-5890 setup screen to enter the Chipset BIOS
Setup screen. You can display a Chipset BIOS Setup option by highlighting it using
the <Arrow> keys. All Plug and Play BIOS Setup options are described in this sec-
tion. The Plug and Play BIOS Setup screen is shown below.
Figure 3.18 Chipset Setup
3.5.1 System Agent (SA) Configuration
Figure 3.19 System Agent (SA) Configuration
mum , Hmrufir ,n nu mer mrérnh qu‘ vhm [Hum]
SOM-5890 User Manual 26
VT-d
This item allows users to enable or disable VT-d.
Primary Display
This item allows users to select which graphics controller to use as the primary
boot device.
3.5.1.1 Intel IGFX Configuration
Figure 3.20 Intel IGFX Configuration
Internal Graphics
This item allows users to enable or disable IGD.
GTT Size
This item allows users to select GTT size.
Aperture Size
This item allows users to select aperture size.
DVMT Pre-Allocated
This item allows users to select DVMT pre-allocated memory size.
DVMT Total Gfx Mem
This item allows users to select DVMT total memory size.
Gfx Low Power Mode
This item allows users to enable or disable IGD low power mode.
mm e‘m: 3mm , Hurlzm w 3w mew:
27 SOM-5890 User Manual
Chapter 3 BIOS Setup
LCD Control
Figure 3.21 LCD Control
Primary IGFX Boot Display
Select boot display device at post stage.
LCD Panel Type
This item allows users to select panel resolution.
Panel Scaling
This item allows users to enable or disable panel scaling.
Active LFP
This item allows users to select LFP configuration.
FEED , Gen x
SOM-5890 User Manual 28
3.5.1.2 NB PCIe Configuration
Figure 3.22 NB PCIe Configuration
PEG0 - Gen x
Select PEG0 speed.
Always Enable PEG
This item allows users to enable or disable PEG always.
PEG ASPM
This item allows users to enable or disable PEG ASPM.
uh mm... 7 m 4mm
29 SOM-5890 User Manual
Chapter 3 BIOS Setup
3.5.2 PCH-IO Configuration
Figure 3.23 PCH-IO Configuration
PCH LAN controller
Enables or disables the PCH LAN controller.
Wake on LAN
Enables or disables PCH LAN wake up from sleep state.
Azalia Controller
Enables or disables the azalia controller.
Azalia Internal HDMI codec
Enables or disables the azalia internal HDMI codec.
High Precision Timer
Enables or disables the high precision timer.
SLP_S4 Assertion Width
This item allows users to set a delay of sorts.
Restore AC Power Loss
This item allows users to select off, on and last state.
[Enan m1} » m Exnress mt Fur! 1
SOM-5890 User Manual 30
3.5.2.1 USB Configuration
Figure 3.24 USB Configuration
EHCI1/EHCI2
Enables or disables the EHCI controller.
USB Ports Per-Port Disable Control
This item allows users to enable or disable each USB port individually.
3.5.2.2 PCI Express Configuration
Figure 3.25 PCI Express Configuration
Fwy: urx mum , Er
31 SOM-5890 User Manual
Chapter 3 BIOS Setup
PCI Express Root Port x
This item allows users to configure PCI express ports.
3.6 Boot Settings
Figure 3.26 Boot Setup Utility
Setup Prompt Timeout
This item allows users to select the number of seconds to wait for setup activa-
tion key.
Bootup NumLock State
Select the Power-on state for Numlock.
Quiet Boot
If this option is set to Disabled, the BIOS displays normal POST messages. If
Enabled, an OEM Logo is shown instead of POST messages.
Option ROM Message
Set display mode for option ROM.
Interrupt 19 Capture
This item allows option ROMs to trap interrupt 19.
1st/2nd/3rd/4th/5th/6th/7th Boot
This item allows users to set boot device priority.
Rdmmstr‘atur- Fassmr‘d
SOM-5890 User Manual 32
3.7 Security Setup
Figure 3.27 Password Configuration
Select Security Setup from the SOM-5890 Setup main BIOS setup menu. All Security
Setup options, such as password protection is described in this section. To access
the sub menu for the following items, select the item and press <Enter>:
Change Administrator / User Password
Select this option and press <ENTER> to access the sub menu, and then type
in the password.
Hmm 'ewc 1mm , "rm-:zm "u Mu HVPV‘
33 SOM-5890 User Manual
Chapter 3 BIOS Setup
3.8 Save & Exit
Figure 3.28 Save & Exit
3.8.1 Save Changes and Exit
When users have completed system configuration, select this option to save
changes, exit BIOS setup menu and reboot the computer if necessary to take effect
of all system configuration parameters.
3.8.2 Discard Changes and Exit
Select this option to quit Setup without making any permanent changes to the system
configuration.
3.8.3 Save Changes and Reset
When users have completed system configuration, select this option to save
changes, exit the BIOS setup menu and reboot the computer to take effect of all sys-
tem configuration parameters.
3.8.4 Discard Changes and Reset
Select this option to quit Setup without making any permanent changes to the system
configuration and reboot the computer.
3.8.5 Save Changes
When users have completed system configuration, select this option to save changes
without exiting the BIOS setup menu.
3.8.6 Discard Changes
Select this option to discard any current changes and load previous system configu-
ration.
SOM-5890 User Manual 34
3.8.7 Restore Defaults
The SOM-5890 automatically configures all setup items to optimal settings when
users select this option. Optimal Defaults are designed for maximum system perfor-
mance, but may not work best for all computer applications. In particular, do not use
the Optimal Defaults if the user’s computer is experiencing system configuration
problems.
3.8.8 Save User Defaults
When users have completed system configuration, select this option to save changes
as user defaults without exit BIOS setup menu.
3.8.9 Restore User Defaults
The users can select this option to restore user defaults.
Chapter 4
4S/W Introduction &
Installation
SOM-5890 User Manual 36
4.1 S/W Introduction
The mission of Advantech Embedded Software Services is to "Enhance quality of life
with Advantech platforms and Microsoft Windows embedded technology." We enable
Windows Embedded software products on Advantech platforms to more effectively
support the embedded computing community. Customers are freed from the hassle
of dealing with multiple vendors (Hardware suppliers, System integrators, Embedded
OS distributor) for projects. Our goal is to make Windows Embedded Software solu-
tions easily and widely available to the embedded computing community.
4.2 Driver Installation
The Intel Chipset Software Installation (CSI) utility installs the Windows INF files that
outline to the operating system how the chipset components will be configured.
4.2.1 Windows XP professional
To install the drivers please connect to internet and browse the website http://sup-
port.advantech.com.tw, download the drivers that you want to install and follow
Driver Setup instructions to complete the installation.
4.2.2 Other OS
To install the drivers for Other Windows OS or Linux, please connect to internet and
browse the website http://support.advantech.com.tw to download the setup file.
Appendix A
AWatchdog Timer
This appendix gives you the infor-
mation about the watchdog timer
programming on the SOM-5890
CPU System on Module.
Sections include:
Watchdog Timer Programming
SOM-5890 User Manual 38
A.1 Programming the Watchdog Timer
For details, please refer to iManager & Software API User Manual Chapter 6. Pro-
gramming Overview 6.2 Watchdog (WDog) Functions Class.
Trigger Event Note
IRQ IRQ7, 9, 11 (default disable) IRQ can be set in BIOS
NMI N/A
SCI Power button event
Power Off Support
H/W Restart Support
External WDT N/A
Appendix B
BProgramming GPIO
This Appendix gives the illustra-
tion of the General Purpose Input
and Output pin setting.
Sections include:
System I/O ports
SOM-5890 User Manual 40
B.1 GPIO Register
For details, please refer to iManager & Software API User Manual Chapter 6. Pro-
gramming Overview 6.3 GPIO (I/O) Functions
GPIO Byte Mapping H/W Pin Name
BIT0 GPO0
BIT1 GPO1
BIT2 GPO2
BIT3 GPO3
BIT4 GPI0
BIT5 GPI1
BIT6 GPI2
BIT7 GPI3
Appendix C
CSystem Assignments
This appendix gives you the infor-
mation about the system resource
allocation on the SOM-5890 CPU
System on Module.
Sections include:
System I/O ports
DMA Channel Assignments
Interrupt Assignments
1st MB Memory Map
SOM-5890 User Manual 42
C.1 System I/O Ports
Table C.1: System I/O ports
Addr.range(Hex) Device
0000 - 000F Direct memory access controller
0000 - 0CF7 PCI bus
0010 - 001F Motherboard resources
0020 - 0021 Programmable interrupt controller
0022 - 003F Motherboard resources
0040 - 0043 System timer
0044 - 005F Motherboard resources
0060 - 0060 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
0061 - 0061 System speaker
0062 - 0062 Microsoft ACPI-Compliant Embedded Controller
0063 - 0063 Motherboard resources
0064 - 0064 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
0065 - 0065 Motherboard resources
0066 - 0066 Microsoft ACPI-Compliant Embedded Controller
0067 - 006F Motherboard resources
0070 - 0071 System CMOS/real time clock
0072 - 007F Motherboard resources
0080 - 0080 Motherboard resources
0081 - 0083 Direct memory access controller
0084 - 0086 Motherboard resources
0087 - 0087 Direct memory access controller
0088 - 0088 Motherboard resources
0089 - 008B Direct memory access controller
008C - 008E Motherboard resources
008F - 008F Direct memory access controller
0090 - 009F Motherboard resources
00A0 - 00A1 Programmable interrupt controller
00A2 - 00BF Motherboard resources
00C0 - 00DF Direct memory access controller
00E0 - 00EF Motherboard resources
00F0 - 00FF Numeric data processor
01F0 - 01F7 Primary IDE Channel
0274 - 0277 ISAPNP Read Data Port
0279 - 0279 ISAPNP Read Data Port
02F8 - 02FF Communications Port (COM2)
0378 - 037F Printer Port (LPT1)
03B0 - 03BB Intel(R) HD Graphic
03C0 - 03DF Intel(R) HD Graphic
03F6 - 03F6 Primary IDE Channel
03F8 - 03FF Communications Port (COM1)
0400 - 041F Motherboard resources
04D0 - 04D1 Motherboard resources
0500 - 053F Motherboard resources
43 SOM-5890 User Manual
Appendix C System Assignments
C.2 DMA Channel Assignments
C.3 Interrupt Assignments
0800 - 087F Motherboard resources
0A00 - 0A0F Motherboard resources
0A79 - 0A79 ISAPNP Read Data Port
0D00 - FFFF PCI bus
Table C.1: System I/O ports
Table C.2: DMA channel assignments
Channel Function
0 Available
1 Available
2 Available
3 Available
4 Direct memory access controller
5 Available
6 Available
7 Available
Table C.3: Interrupt assignments
Interrupt# Interrupt source
NMI Parity error detected
IRQ 0 System timer
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 2 Available
IRQ 3 Communications Port (COM2)
IRQ 4 Communications Port (COM1)
IRQ 5 Available
IRQ 6 Available
IRQ 7 Available
IRQ 8 System CMOS/real time clock
IRQ 9 Microsoft ACPI-Compliant System
IRQ 10 Available
IRQ 11 Available
IRQ 12 PS/2 Compatible Mouse
IRQ 13 Numeric data processor
IRQ 14 Primary IDE Channel
IRQ 15 Available
SOM-5890 User Manual 44
C.4 1st MB Memory Map
Table C.4: 1st MB memory map
Addr. range (Hex) Device
00000000 - 0009FFFF System board
000A0000 - 000BFFFF Intel(R) HD Graphic
000A0000 - 000BFFFF PCI Bus
000C0000 - 000CFFFF System board
000D0000 - 000DFFFF PCI bus
000E0000 - 000FFFFF System board
45 SOM-5890 User Manual
Appendix C System Assignments
AD\-\NTECH Enabling m Inlefllganl Planer
www.advantech.com
Please verify specifications before quoting. This guide is intended for reference
purposes only.
All product specifications are subject to change without notice.
No part of this publication may be reproduced in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permis-
sion of the publisher.
All brand and product names are trademarks or registered trademarks of their
respective companies.
© Advantech Co., Ltd. 2011

Products related to this Datasheet

INTEL QM67 COM EXPRESS B847E
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS I3-2340UE
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS B827E
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS I7-2610UE
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS I7-2610UE
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS B810E
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS I3-2310E
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS I7-2715QE
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS I7-2715QE
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS I7-2655LE
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS I7-2655LE
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS I5-2515E
Available Quantity: 0
Unit Price: 0
INTEL QM67 COM EXPRESS I5-2515E
Available Quantity: 0
Unit Price: 0
INTEL I7-2610UE 1.5GHZ W/PLATINU
Available Quantity: 0
Unit Price: 0
INTEL I7-2610UE 1.5GHZ W/PHOENIX
Available Quantity: 0
Unit Price: 0